The Effect of Uncaria gambir on Optical Properties and Thermal Stability of CNF/PVA Biocomposite Films

Open

Remon Lapisa, Anna Niska Fauza, Dieter Rahmadiawan, Krismadinata, Dori Yuvenda, Randi Purnama Putra, Waskito, Nandy Putra, Hairul Abral

2024 Journal of Renewable Materials Vol. 12 Issue 9 Article Cited by 0 Quartile

Abstract

Cellulose-based film has gained popularity as an alternative to synthetic polymers due to its outstanding properties. Among all types of cellulose materials available, cellulose nanofiber (CNF) has great potential to be utilized in a diverse range of applications, including as a film material. In this study, CNF biocomposite film was prepared by using polyvinyl alcohol (PVA) as a matrix and Uncaria gambir extract as a filler. This study aims to investigate the effect of Uncaria gambir extract on the optical properties and thermal stability of the produced film. The formation of the CNF biocomposite films was confirmed using Fourier Transform Infrared Spectroscopy, their transmittance characteristics were measured using UV-Vis spectroscopy and a transmittance meter, while their reflectance was determined using a reflectance meter. The results revealed that the addition of Uncaria gambir extract to the CNF biocomposite film improved its UV-shielding properties, as indicated by the lower percentage of transmittance in the visible region, 10%–70%. In addition, its reflectance increased to 10.6% compared to the CNF film without the addition of Uncaria gambir extract. Furthermore, the thermal stability of the CNF biocomposite film with the addition of Uncaria gambir extract improved to around 400°C–500°C. In conclusion, the results showed that CNF biocomposite film prepared by adding Uncaria gambir extract can be a promising candidate for optical and thermal management materials. © 2024 The Authors.

Affiliations

Mechanical Engineering Department, Universitas Negeri Padang, Padang, 25173, Indonesia; Centre for Energy and Power Electronics Research, Universitas Negeri Padang, Padang, 25173, Indonesia; Department of Mechanical Engineering, National Cheng Kung University (NCKU), Tainan, 70101, Taiwan; Mechanical Engineering Department, Universitas Indonesia, Depok, 16424, Indonesia; Mechanical Engineering Department, Universitas Andalas, Padang, 25163, Indonesia