Enhanced UV blocking, tensile and thermal properties of bendable TEMPO-oxidized bacterial cellulose powder-based films immersed in PVA/Uncaria gambir/ZnO solution

Open

Dieter Rahmadiawan, Hairul Abral, Mohammad Khalid Ilham, Poppy Puspitasari, Rahmat Azis Nabawi, Shih-Chen Shi, Eni Sugiarti, Ahmad Novi Muslimin, Devi Chandra, R.A. Ilyas, Rahadian Zainul

2023 Journal of Materials Research and Technology Vol. 26 Article Cited by 35 SDG 17SDG 14SDG 12SDG 9 Quartile

Abstract

The production of UV-resistant films from biomaterials is currently an active field of research. ZnO nanoparticle polymer fillers have been found to improve UV-light opacity. However, using ZnO as a filler is relatively expensive and time-consuming for film preparation. Substituting some of the ZnO nanoparticles with Uncaria gambir extract has been suggested to reduce the cost of film production, as the phenolic hydroxyl group present in Uncaria gambir provides excellent UV resistance. This study characterized dry bacterial cellulose (BC) powder-based films immersed without and with polyvinyl alcohol/Uncaria gambir extract/ZnO (M) solution for 2 and 5 min. It was found that BC/M biocomposites blocked 100% of the UV light while remaining transparent to visible wavelengths. These bendable biocomposite films also presented high tensile and thermal resistance properties. Immersion for 5 min increased significantly tensile strength, elongation at break, and toughness of the biocomposite to 77.2 MPa, 12.3%, and 5.8 MJ/m3, an increase of 130%, 748%, and 2409%, respectively, compared to uncoated BC film. These results suggest the immersion method could provide more efficient, environmentally friendly biocomposite films with significant UV resistance. © 2023 The Authors

Affiliations

Department of Mechanical Engineering, National Cheng Kung University (NCKU), Tainan, Taiwan; Department of Mechanical Engineering, Universitas Negeri Padang, Sumatera Barat, Padang, 25173, Indonesia; Laboratory of Nanoscience and Technology, Department of Mechanical Engineering, Andalas University, Padang, 25163, Indonesia; Research Collaboration Center for Nanocellulose, BRIN-Andalas University, Padang, 25163, Indonesia; Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Malang, Semarang No. 5, Malang, 65145, Indonesia; Laboratory of High-Temperature Coating, Research Center for Physics Indonesian Institute of Sciences (LIPI) Serpong, Indonesia; Department of Mechanical Engineering, Andalas University, Padang, 25163, Indonesia; School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor Bahru, 81310, Malaysia; Department of Chemistry, Faculty of Mathematics and Natural Science, Universitas Negeri Padang, West Sumatera, 25171, Indonesia

Research at a Glance

Premium content — register to unlock

Research at a Glance

Register to unlock

Topics & SDG Alignment

Premium content — register to unlock

Topics & SDG Alignment

Register to unlock

Collaboration

Premium content — register to unlock

Collaboration

Register to unlock

Author Profile (Selected)

Premium content — register to unlock

Author Profile (Selected)

Register to unlock

References Overview

Premium content — register to unlock

References Overview

Register to unlock

Journal & Source

Premium content — register to unlock

Journal & Source

Register to unlock

Metadata & Integrity

Premium content — register to unlock

Metadata & Integrity

Register to unlock