Achmad Munir, Rheyuniarto Sahlendar Asthan, Agus Dwi Prasetyo, Zulfi, Yohandri
The paper deals with the development of a flexible dipole antenna which is printed on a thin plastic mica sheet for Radio Frequency Identification (RFID) application. The characterization is applied experimentally for the proposed antenna in some bending conditions to demonstrate its feasibility as a front-end flexible device at Ultra High Frequency (UHF) band. The proposed dipole RFID tag antenna which takes a sticker-typed form is made by an aluminium foil as the radiator with the total size of 72.27 mm by 18.83 mm. The result shows that the realized antenna resonates at the frequency of 975 MHz and has the bandwidth response covering the desired application. © 2023 IEEE.
School of Electrical Engineering and Informatics, Institut Teknologi Bandung, Radio Telecommunication and Microwave Laboratory, Bandung, 40132, Indonesia; Institut Teknologi Sumatera, Department of Electrical Engineering, Lampung, 35365, Indonesia; School of Electrical Engineering, Telkom University, Bandung, 40257, Indonesia; Universitas Negeri Padang, Faculty of Mathematic and Natural Sciences, Physics Department, West Sumatera, Padang, 25131, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock